Gas Leaks from Carburetor

• Float Valve does not seat properly due to dirt, rust or material failure.
• Float is set too high or a pin hole absorbs gasoline into float.
• Main Jet or Cap Jet Tip is not "dished" / "indented".
• Loose fuel line fitting, drain plug, filter strainer, GAV, Passage plugs, etc..
• Gaskets are not sealing properly.
• Gasket at Main Jet is too thick or multiples are used, resulting in tip being too low.

ˆ Top of Page  •  Drain Plug  •  Filter Strainer  •  Float Valve and Float  •  Gaskets  •  Main Jet  •  Cap Jet